- Knife gate valves
- Knife gate valves with through knife of PA 510 series
Knife gate valves with through knife of PA 510 series
![]() |
PA 510 series double-acting knife gate valve with through conduit knife is designed for media with a high concentration of solids. Body made of cast iron or various steel grades consists of two halves machined with high precision. Main applications of PA 510 series knife gate valves: - transportation of liquids with a suspended solids content of up to 20%. - transportation of pulp and ground wood, alcoholic beverages, powders, ash and highly concentrated sludge. Can also be used for gravity feed of solid and powdery substances, because the gate cutting edge allows cutting off high density flows. A special gate design eliminates possibility of deposits on the sealing surface. PA 510 series gates are widely used in the following industries: – paper-and-pulp industry; – food industry; – mining industry; – power industry; – production and transportation of bulk materials; – waste water pumping.
|
Manufacture and supply: | According to TU 3700-002-55604618-2013 |
Design: | Knife gate valve with through conduit knife |
Nominal diameter | DN 50 – DN 1200 |
Working pressure |
– DN 50-250 – 10 kgf/cm2 – DN 300-400 – 6 kgf/cm2 – DN 450-600 – 4 kgf/cm2 – DN 700-1200 – 2 kgf/cm2 |
Actuator: |
– handwheel DN 50-500, – gearbox DN 50-1200, – lever DN 50-300 – pneumatic actuator, electric actuator DN 50-1200 |
Main process media: | Designed for media with a high concentration of solid particles: - pumping liquids with a suspended solids content of up to 20%. - pulp and ground wood (pulp concentration from 5% to 20%), alcoholic beverages, powders, ash and highly concentrated sludge |
Connection: |
– wafer between pipeline flanges; (Connection dimensions acc. to GOST 33259-15, version B, mating flanges – acc. to GOST 33259-15, type 01 or 11, version B) |
Process medium supply direction: | Any |
Climatic version: | У, УХЛ4, ХЛ, Т, ТМ, ТВ acc. to GOST 15150-69 |
Actuator type'sPromArm LLC can supply any actuator types since the knife gate valve design is capable of complete interchangeability of components. |
||
Manual | Automatic | Accessories |
Handwheel with a rising stem | Electric actuator | Position indicator |
Handwheel with a non-rising stem | Pneumatic actuator | Limit switches |
Chainwheel | Hydraulic actuator | Positioner |
Lever | Stem extension | |
Gearbox |

by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |
by request
+ | - |