- Butterfly valves
- Welded type
Welded butterfly valves
Butterfly valves with welded ends are presented in the line of products produced by us in the series PA 900. The products received the greatest demand in the direction of works related to the arrangement and improvement of heat supply networks, because the products have a high reliability index.
In most cases, welded butterfly valves are installed on underground sections of the pipeline. The process takes place without the formation of welding seams. Mounting can also be carried out in thermal chambers. Installation works are carried out in places where there are increased requirements for the tightness of the pipeline connection with the valve.
Welded butterfly valves are widely used on process pipelines in such industries as energy, metallurgy, chemical, oil and recycling industries.
DN 500 PN 25
body material WCB steel, disk material WCB steel, seat material ss304+graphite
by request
+ | - |
DN 600 PN 25
body material WCB steel, disk material WCB steel, seat material ss304+graphite
by request
+ | - |
DN 300 PN 25
body material WCB steel, disk material WCB steel, seat material ss304+graphite
by request
+ | - |
DN 400 PN 25
body material WCB steel, disk material WCB steel, seat material ss304+graphite
by request
+ | - |
DN 800 PN 25
body material WCB steel, disk material WCB steel, seat material ss304+graphite
by request
+ | - |
by request
+ | - |
DN 700 PN 25
body material WCB steel, disk material WCB steel, seat material ss304+graphite
by request
+ | - |
DN 400 PN 25
body material WCB steel, disk material CF8 stainless steel, seat material
by request
+ | - |
by request
+ | - |
by request
+ | - |
DN 100 PN 25
body material CF8 stainless steel, disk material CF8 stainless steel, seat material
by request
+ | - |
DN 800 PN 25
body material WCB steel, disk material CF8 stainless steel, seat material
by request
+ | - |